TUNING THE ENGINE 16
123
Warning
Danger of accidents
The engine may go out spontaneously if the idle speed is set too low.
–
Set the idle speed to the specified value. (Your authorized Husqvarna Motorcycles workshop will be
glad to help.)
V01368-10
–
Run the engine until warm.
The cold start button is deactivated
–
The cold start but-
ton is in its basic position. (
–
Set the idle speed by turning the idle speed adjusting
screw
1
.
Guideline
Idle speed
2,250 … 2,350 rpm
Tachometer (45129075000)
Info
Turning counterclockwise lowers the idle speed.
Turning clockwise raises the idle speed.
16.6
Teaching the throttle valve position
Info
If the control unit detects that the throttle valve position at idle speed needs to be retaught, then the
malfunction indicator lamp flashes 2x per second.
H02263-10
Danger
Danger of poisoning
Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Allow the vehicle to run at idle speed.
The malfunction indicator lamp stops flashing once
teaching is completed.
Info
If the engine becomes too hot, perform a cool-down
ride at medium revs.
Then do not switch off the engine after this, but leave
it running at idle speed until teaching is completed.
