Husqvarna F2101V1, Руководство пользователя

Страница: 43 / 151

TUNING THE CHASSIS 10
41
402415-10
Main work
–
Position the sag gage in the rear axle and measure the
distance to marking
SAG on the rear fender.
Sag gauge (00029090500)
Sag gage pin (00029990010)
–
Note down the value as dimension
A
.
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 49)
10.8 Checking the static sag of the shock absorber
402416-10
–
Measure dimension
A
of rear wheel unloaded. ( p. 40)
–
Hold the motorcycle upright with aid of an assistant.
–
Measure the distance again between the rear axle and mark-
ing
SAG on the rear fender using the sag gage.
–
Note the value as dimension
B
.
Info
The static sag is the difference between measure-
ments
A
and
B
.
–
Check the static sag.
Static sag (FC 250 EU) 35 mm (1.38 in)
Static sag (FC 250 US) 35 mm (1.38 in)
» If the static sag is less or more than the specified value:
–
Adjust the spring preload of the shock absorber.
(
p. 42)