Husqvarna F2101V0, Руководство пользователя

Страница: 104 / 138

15 TUNING THE ENGINE
102
15.1 Checking the play in the throttle cable
400192-11
–
Check the throttle grip for smooth operation.
–
Move the handlebar to the straight-ahead position. Turn the
throttle grip back and forth slightly and determine the play in
throttle cable
A
.
Play in throttle cable 2 … 3 mm (0.08 … 0.12 in)
» If the throttle cable play does not meet the specified
value:
–
Adjust the play in the throttle cable. ( p. 102)
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Start the engine and let it run at idle speed. Move the handle-
bar to and fro over the entire steering range.
The idle speed must not change.
» If the idle speed changes:
–
Adjust the play in the throttle cable. ( p. 102)
15.2 Adjusting the play in the throttle cable
Info
If the correct routing of the throttle cable has already been secured, the fuel tank does not need to be
removed.
Preparatory work
–
Turn tap handle of the fuel tap to the OFF position.
–
Remove the air filter box cover. ( p. 60)
–
Remove the seat. ( p. 59)
–
Remove the right side cover. ( p. 64)
–
Remove the fuel tank. ( p. 65)
–
Check the throttle cable routing. ( p. 73)
S03442-10
Main work
–
Move the handlebar to the straight-ahead position.
–
Push back sleeve
1
.
–
Ensure that the throttle cable sleeve is pushed all the way
into barrel adjuster
2
.
–
Loosen nut
3
.