Husqvarna F2101V0, Руководство пользователя

Страница: 102 / 138

14 COOLING SYSTEM
100
K01245-10
–
Make sure that screw
1
is tightened.
–
Position the motorcycle upright.
–
Completely fill the radiator with coolant.
Coolant ( p. 127)
K01246-10
–
Loosen screw
2
until coolant escapes without bubbles.
–
Mount and tighten screw
2
.
Guideline
Bleeder screw, cylin-
der head M6 8 Nm (5.9 lbf ft)
–
Completely fill the radiator with coolant.
Coolant ( p. 127)
K01247-10
–
Mount radiator cap
3
.
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Allow the engine to warm up and cool down again.
–
Check the cooling system for leaks.
–
Check the coolant level. ( p. 98)
14.9 Changing the coolant
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or other cooling system components if the engine or
the cooling system are at operating temperature.
–
Allow the cooling system and the engine to cool down before you open the radiator, the radiator
hoses or other components of the cooling system.
–
In the event of scalding, rinse the area affected immediately with lukewarm water.