17 .4.33 Checking the clutch
•-
- Check clutch throw-out
O
for damage and wear.
If there is damage or wear:
- Change the clutch throw-out.
- Check axial bearing
8
for damage and wear.
If there is damage or wear:
- Change the axial bearing.
- Place the clutch push rod
8
on a flat surface and check for run-out.
If there is run-out:
- Change the clutch push rod.
- Check the length of clutch springs
C,.
-•
310351-10
I Clutch spring - length
I �
41.9 mm (� 1 .65 in)
If the clutch spring length is shorter than specified:
- Change all clutch springs.
- Check the contact surface of pressure cap
0
for damage and wear.
If there is damage or wear:
- Change the pressure cap.
- Check clutch basket
(D
for damage and wear.
If there is damage or wear:
- Change the clutch basket.
- Check needle bearing @ and collar sleeve
@)
for damage and wear.
If there is damage or wear:
- Change the needle bearing and collar sleeve.
- Check intermediate clutch discs
@)
and
G,
for damage and wear.
If the intermediate clutch discs are not level and are pitted:
- Change all intermediate clutch discs.
- Check clutch facing discs Ci) for discoloration and scoring.
17 ENGINE
205
