Husqvarna DXR 145, Руководство оператора, Страница: 71 / 120

10. Remove the drain plug (A) for the hydraulic oil.
A
11. Let the hydraulic oil drain into the container.
12. Replace the hydraulic oil filter if it is necessary. Refer
to
To replace the hydraulic oil filter (DXR 275, DXR
305, DXR 315) on page 74 .
13. Install the drain plug for the hydraulic oil and tighten
it.
14. Install the air filter and tighten it.
15. Close the left hatch on the product.
CAUTION:
Do not start the product
when the hydraulic oil tank is empty. The
hydraulic pump will become damaged.
Fill the hydraulic oil tank with hydraulic
oil. Refer to
To fill the hydraulic oil (DXR
275, DXR 305, DXR 315) on page 72 .
To fill the hydraulic oil (DXR 145)
WARNING:
Risk of burn injury. The
hydraulic oil becomes hot during operation
of the product. Let the product become cool
before you replace the hydraulic oil.
1. Park the product on level ground.
2. Fully retract the arm system.
3. Fully retract the outriggers. Refer to
To operate the
outriggers on page 61
.
4. Stop the product. Refer to
To stop the product (DXR
145) on page 62 .
5. Open the 2 rubber clips.
6. Remove the left side cover.
1401 - 002 - 15.10.2021 71