Husqvarna C38D Скачать руководство пользователя страница 8

Страница: 8 / 21

ASSEMBLY

SUPPORT POST (See Fig. 4)

Use Hardware - - GROUP "C"

CAUTION: Container support is spring
loaded and locked to the cover. Handle
cover assembly carefully so as not to
unlatch the cover from the container
support.

•

Rotate cover assembly onto its side as shown.

•

Assemble support post to container support with the
three (3) carriage bolts and locknuts. Tighten securely.

FIG. 5

END CAP

COVER ASSEMBLY

SUPPORT POST

MOUNTING
BRACKET

LANCED TABS

BRACKET
SUPPORT PIN

RETAINER
SPRING

MOUNTING TO TRACTOR (See Fig. 5)

Use Hardware - - GROUP "D"

NOTE

: For ease of assembly, you may wish to obtain the

assistance of another person for mounting assembly to
tractor.
•

Raise seat on tractor to allow assembly to be mounted.

•

With cover closed, lift assembly and place support post
inside mounting bracket. Allow assembly to rest on
lanced tabs of mounting bracket.

•

Line up holes in mounting bracket with holes in support
post and insert bracket support pin. Secure with retainer
spring.

•

Unlatch and open cover.

•

Install the three (3) tubing end caps onto container
support.

•

Tap each end cap onto container support tubes to seat
securely.

CONTAINER ASSEMBLY (See Fig. 6)
No hardware required

•

Place bottom half inside of top half, as shown.

•

Place one foot inside bottom half and lift top half to meet
bottom half.

•

Press halves tightly together while lifting top to lock into
place as shown.

IMPORTANT

: BEFORE LOCKING THE TABS, HOOKED

EDGES ON BOTH HALVES MUST OVERLAP TO FORM
SEAL AS SHOWN IN INSET.

•

Repeat for second container.

FIG. 4

LOCKNUTS

CARRIAGE
BOLTS

SUPPORT
POST

Содержание C38D






















Результаты поиска

Содержание C38D

Отзывы:

Бренды по названию

Популярные бренды

Husqvarna C38D, Руководство пользователя

Результаты поиска

Содержание C38D

Отзывы:

Бренды по названию

Популярные бренды