background image

Symbols on the product

WARNING: This product can be dangerous

and cause serious injury or death to the

operator or others. Be careful and use the

product correctly.

Read the manual carefully and make sure

that you understand the instructions before

you use the product.

Use hearing protection.

Risk of injury. Be careful around the drive

belt.

Hot surface.

XXXXXXXXXX

Keep your hands away from this area.

Keep your hands and feet away from the

blades.

Lifting point on the safety frame.

This product is in compliance with applicable

EC directives.

Note: Other symbols/decals on the product refer to

special certification requirements for some markets.

Rating plate 

3

4

9

11

8

10

5

2

1

6

7

1. IP classification
2. Product type
3. Product weight
4. Rated power
5. Production year
6. Serial number
7. Product number
8. Voltage, V
9. Manufacturer
10. Current, A
11. Frequency, Hz

Safety labels

Remove the floating disc before you lift the product.

Set the product in maintenance position. Refer to 

To set

the product in maintenance position on page 10

.

Product liability

As referred to in the product liability laws, we are not

liable for damages that our product causes if:
• the product is incorrectly repaired.

1132 - 001 - 06.04.2020

3

Содержание BG 245E





















Отзывы:

Похожие инструкции для BG 245E