Husqvarna AR19 страница 9 Скачать руководство пользователя | Manualshive

Страница: 9 / 56

background image

English – 7

SAFETY INSTRUCTIONS

•

Check that all safety decals are in place. See
the chapter ”Symbols and decals”.

•

Learn how to use the machine and its controls
safely and learn to recognize the safety decals.

•

Check that the machine is in serviceable
condition prior to use; see the chapter
”Maintenance/Maintenance schedule”.

•

Only use the machine in daylight or in other
well-lit conditions. Keep the machine a safe
distance from holes or other irregularities in the
ground. Pay attention to other possible risks.

•

Only allow the machine to be used by adults
who are familiar with its use.

•

Never allow children or persons not trained in
the use of the machine to use or service it.
Local laws may regulate the age of the user.

•

People and animals can distract you causing
you to lose control of the machine. For this
reason, you should always concentrate and
focus on the task at hand.

•

Make sure that other people are nearby when
you are using the machine so that you can call
for help should an emergency arise.

•

Never leave the machine unsupervised with the
engine running.

•

Husqvarna original spare parts are designed
and specified to maintain high quality and
correct fit for optimal durability and lifespan.
From a safety point of view, you should only
use Husqvarna original spare parts.

•

The machine is tested and approved only with
the equipment originally provided or
recommended by the manufacturer.

Children

•

Serious accidents may occur if you fail to be on
guard for children in the vicinity of the machine.
Never assume that children will stay put where
you last saw them.

•

Keep children away from the work area and
under close supervision by another adult.

•

Keep an eye out and shut off the machine if
children enter the work area.

•

Never allow children to operate the machine.

•

Be particularly careful near corners, bushes,
trees or other objects that block your view.

•

Keep children away from the machine.

Keep children away from the work area.

Keep children away from the machine.

WARNING!

Overexposure to vibration can lead
to circulatory or nerve damage,
particularly in people who have
impaired circulation. Contact your
doctor if you experience symptoms
that could have been caused by
overexposure to vibration.
Examples of common symptoms
include numbness, pain, muscle
weakness, change of skin color, or
an uncomfortable tingling
sensation. These symptoms appear
most frequently in the fingers,
hands or wrists.

8011-148

8011-146

«
...
7
8
9
10
11
...
»

Содержание AR19

























































Отзывы:

Нет отзывов

Похожие инструкции для AR19

Бренд: F.F. Group Страницы: 76

Бренд: Shindaiwa Страницы: 24

Бренд: Yard Machines Страницы: 28

GARDEN WAY Pro line 12183

Бренд: Troy-Bilt Страницы: 36

Бренд: Troy-Bilt Страницы: 32

Бренд: Troy-Bilt Страницы: 48

Бренд: Vito Agro Страницы: 72

Бренд: S&A Страницы: 34

Бренд: Retigo Страницы: 56

Бренд: Hyundai Страницы: 52

Бренд: Daewoo Страницы: 64

Бренд: GreenWorks Pro Страницы: 20

Бренд: York Страницы: 28

Бренд: VALERA Страницы: 2

Бренд: Craftsman Страницы: 36

Бренд: Craftsman Страницы: 32

Thermo-con INR-244-831

Бренд: SMC Networks Страницы: 22

Бренд: SMC Networks Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды