ASSEMBLING AND ADJUSTMENTS
English
–
11
45
°°°°
•
Loosen the locking knob for depth setting and raise up
the cutting arm.
•
Loosen the lock knob for the mitre (1). Angle the
cutting arm until the screw (2) bottoms at the guide
end plate.
•
Check the angle, 45
°
and if needed loosen the lock
nut and adjust the screw (2) until it bottoms at the
guide end plate.
22,5
°°°°
•
Loosen the locking knob for depth setting and raise up
the cutting arm.
•
Loosen the lock knob for the mitre (1). Angle the
cutting arm until the markings for 22,5
°
are opposite
each other (2).
•
Check the angle, 22,5
°
and if needed adjust the
triangular shaped marking (2).
2
1
45
2
1
2
1
2
67,5
22,5
