Husqvarna 967 28 76-14, Руководство оператора

Страница: 20 / 108

2. Push the start/stop switch to the STOP position. The
engine must stop.
To do a check of the muffler
1. Make sure that the muffler is not defective.
WARNING: Do not use a product that
has a defective muffler or a muffler that
is in bad condition.
2. Make sure that the muffler is correctly attached to
the product.
AutoTune
™
Your product has the AutoTune ™ function that adjusts
the carburetor automatically, which gives the best
possible adjustment. AutoTune
™
lets the engine adapt
to weather conditions, altitude, gasoline and the type of
two-stroke oil.
CAUTION: If AutoTune
™
does not work
correctly, speak to your servicing dealer.
The product adjusts correctly after some
fuelings.
To replace a broken or worn starter
rope
1. Loosen the screws to the starter housing.
2. Remove the starter housing.
3. Pull out the starter rope approximately 30 cm/12 in
and put it in the notch on the pulley.
4. Let the pulley rotate slowly rearward to release the
recoil spring.
5. Remove the bolt in the center of the pulley and
remove the pulley.
6. Hold the starter rope handle.
20 524 - 003 -