Husqvarna 966610501, Руководство оператора и каталог запасных частей

Страница: 6 / 14

6
COVER
ASSEMBLY
ASSEMBLY
UNPACKING INSTRUCTIONS
• Remove all parts and packing materials from
carton.
Check carton contents against list. Be sure all
•
parts are there.
TOOLS REQUIRED
•
½" Wrench (2)
•
9
/
16
" Wrench (2)
•
5
/
16
" Socket
•
Ft/Lbs Torque Wrench
•
Drill
•
5
/
16
" Drill Bit
•
9
/
16
" Socket
•
25
/
64
" Drill Bit
•
Phillips Screwdriver
•
Ratchet
PARTS IDENTIFICATION
CONTAINER CONTENTS
2 - Soft bag containers 1 - Bag of Hardware
1 - Upper Chute
1 - Lower Chutes
1 - Cover Assembly 1 - Mounting Hardware
BAG
CONTAINERS
LOWER
CHUTE
NOTE: When right hand (RH) and left hand (LH) are
mentioned in this manual, it means when you are
seated on the mower in the operator’s position.
CAUTION
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
• Set parking brake.
• Place motion control levers in “NEUTRAL” position.
• Turn ignition key “OFF” and remove key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect spark plug and place wire where it cannot come in contact with
plug.
UPPER
CHUTE