Husqvarna 966529102, Руководство оператора и каталог запасных частей

Страница: 10 / 20

10
Remove plastic end caps from the center two bag 1.
support arms. Fully insert spacer plugs into the
ends of the support tubes. It may be necessary
to tap the spacers into place with a hammer or
mallet. Replace the plastic end cap back over
the spacer. The additional extension will hold the
hood more securely when latched.
8063-049
ASSEMBLY
8
INSTALLING CHUTES
Place middle chute over the top end of the blower 1.
assembly. Stretch the chute latch on the blower
assembly up and onto the acorn nut on the middle
chute.
Slide the upper chute discharge end into the
2.
hood inlet and fit the lower end over middle chute.
Secure middle chute to upper as in Step 1.
Rotate the chute so the opening is facing
3.
downwards toward the container bags.
Middle Chute
Chute Latch
7
MOUNTING COVER ASSEMBLY
NOTE:
Assistance from another person may ease
mounting the cover assembly to mower.
Lift and rotate cover to align the cover brackets 1.
with support assembly tubes.
Slide the cover down over the support tubes until
2.
secure.
8063-082
8063-089
Install containers on support frame, overlapping 1.
containers at center tube.
Note:
One container should always overlap the
other container at the center tube.
Close cover and lock latch handle over support
2.
tubes.
10
CONTAINER INSTALLATION
8063-093
9
INSTALLING SPACER PLUGS
Remove center
end caps
Insert spacers
and replace caps