Husqvarna 966503401 Скачать руководство пользователя | Manualshive

Страница: 11 / 60

background image

11

SAfETy

Personal Safety Equipment

8011-670a

Personal protective equipment

6003-004

Mow up and down, not side to side

make sure that you have first aid equipment close

•

at hand when using the machine.
Never use the machine when barefoot.

•

Always wear protective shoes or boots, preferably

•

with steel toe caps.
Always wear approved protective glasses or a full

•

visor when assembling or driving.
Always wear gloves when handling the blades.

•

Never wear loose clothing that can get caught in

•

moving parts.
Use ear protectors to avoid damage to hearing.

•

Slope Operation

Slopes are a major factor related to loss of control and
tip-over accidents, which can result in severe injury or
death. operation on all slopes requires extra caution.
If you cannot back up the slope or if you feel uneasy
on it, do not mow it.

mow up and down slopes (10 degrees maximum),

•

not across.
Watch for holes, ruts, bumps, rocks, or other

•

hidden objects. Uneven terrain could overturn the
machine. Tall grass can hide obstacles.
Choose a low ground speed so that you will not

•

have to stop while on the slope.
Do not mow on wet grass. Tires may lose traction.

•

Avoid starting, stopping, or turning on a slope. If

•

the tires lose traction, disengage the blades and
proceed slowly straight down the slope.
Keep movement on the slopes slow and gradual.

•

Do not make sudden changes in speed or
direction, which could cause machine to roll over.
Use extra care while operating machine with

•

grass catchers or other attachments; they can
affect the stability of the machine.
Do not use on steep slopes.

•

Do not try to stabilize the machine by putting a

•

foot on the ground.
Do not mow near drop-offs, ditches, or

•

embankments. The machine could suddenly roll
over if a wheel is over the edge or if the edge
caves in.

WARNING!

When using the machine, approved personal protective equipment (shown in illustrations)
shall be used. Personal protective equipment cannot eliminate the risk of injury but it
will reduce the degree of injury if an accident does happen. Ask your retailer for help in
choosing the right equipment.

WARNING!

Do not drive up or down hills with
slopes greater than 10 degrees. And
do not drive across any slopes.

«
...
9
10
11
12
13
...
»

Содержание 966503401





























































Отзывы:

Нет отзывов

Похожие инструкции для 966503401

Бренд: Jacobsen Страницы: 114

Бренд: Yard-Man Страницы: 36

Бренд: MTD Страницы: 16

Бренд: MTD Страницы: 28

Бренд: SANLI Страницы: 16

Бренд: Skil Страницы: 106

Бренд: Qualcast Страницы: 15

Бренд: Weed Eater Страницы: 16

Бренд: Lastec Страницы: 23

Бренд: Worx Страницы: 64

Poulan Pro 961140016

Бренд: Poulan Pro Страницы: 2

Бренд: Lastec Страницы: 53

Бренд: Jonsered Страницы: 44

Бренд: Kubota Страницы: 299

Бренд: Craftsman Страницы: 60

Бренд: Craftsman Страницы: 64

Бренд: Craftsman Страницы: 60

Бренд: Craftsman Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды