Husqvarna 966067001, Руководство оператора

Страница: 20 / 36

MAINTENANCE
20
1)
First change after 20 hours.
2)
In dusty conditions maintenance is required at shorter intervals.
3)
Performed by authorized service workshop.
4) Performed every second year.
With daily use, the machine shall be lubricated twice weekly.
Maintenance Schedule
The following is a list of maintenance procedures that must be performed on the machine.
For those points not
described in this manual, visit an authorized service workshop.
MAINTENANCE
Daily
Before
Staring
Maintenance interval - months/hours
1/25 3/50 6/100 12/300
Check the engine oil level
●
Replace engine oil
1)
●
Check the air filter
●
Replace air filter cartridge
2)
●
Clean sludge reservoir for fuel system
●
Check and clean the spark plug
●
Replace spark plug
●
Check idle speed
●
Check and adjust play in valves
3)
●
Clean fuel tank
3)
●
Check, replace fuel lines as necessary
3, 4)
●
Check clutch and clutch cable
●
Check flail blade lock washers
●
Check decals and warning signs
●
Check the seed holes for the seeder
●
Check wear and tension on the belts
●
Check blade wear and condition
●
Check the chassis, bolts and set screws
●
Check the seed control lever for the seeder
●
Check the wire mountings on the seeder
●
Lubrication; see the Lubrication schedule
WARNING!
No service operations may be performed on the engine or unit unless:
The engine is stopped.
The ignition cable has been removed from the spark plug.
The machine is securely parked where it will not tip or begin rolling.