Husqvarna 961430089, Руководство оператора

Страница: 16 / 52

16
3
2
1
4. Wipe off any spilled oil from lawn mower or side of
engine.
5. Fill engine with oil. Slowly pour oil down the oil fill
spout into the engine.
6. Wait one minute to allow oil to settle. Use guage on
oil fill cap/dipstick for checking level. Insert dipstick
into the tube and rest the oil fill cap on the tube. DO
NOT thread the cap into the tube when taking reading
(Figure 24).
7. Continue adding small amounts of oil and recheck-
ing the dipstick until it reads full. DO NOT overfill, or
engine will smoke on startup.
8. Always be sure to retighten oil fill cap/dipstick before
starting engine.
9. Reconnect spark plug wire to spark plug.
Figure 24
1. Oil fill cap/dipstick
2. Upper mark
3. Lower mark
AIR FILTER
Your engine will not run properly and may be damaged
by using a dirty air filter. Replace the air filter every 100
hours of operation or every season, whichever occurs first.
Service air cleaner more often under dusty conditions.
TO CLEAN AIR FILTER
1. Remove cover (Figure 25).
2. Carefully remove cartridge.
3. Clean by gently tapping on a flat surface. If very dirty,
replace cartridge.
3
1
2
4
Figure 25
1. Slot
2. Tab
3. Cartridge
4. Filter cover
CAUTION: Petroleum solvents, such as ker o sene,
are not to be used to clean car tridge. They may
cause de te ri o ra tion of the cartridge. Do not oil
car tridge. Do not use pres sur ized air to clean or
dry car tridge.
4. Install cartridge, then replace cover.
MAINTENANCE