Husqvarna 701 Supermoto 2017 Скачать руководство пользователя страница 115

Страница: 115 / 212

13 BRAKE SYSTEM

113

13.10

Adding rear brake fluid

Warning

Danger of accidents

An insufficient brake fluid level will cause the brake system to fail.

If the brake fluid level drops below the

MIN

marking, the brake system is leaking or the brake linings are worn down.

–

Check the brake system and do not continue riding until the problem is eliminated. (Your authorized Husqvarna Motorcycles

workshop will be glad to help.)

Warning

Skin irritation

Brake fluid causes skin irritation.

–

Keep brake fluid out of the reach of children.

–

Wear suitable protective clothing and safety glasses.

–

Do not allow brake fluid to come into contact with the skin, the eyes or clothing.

–

Consult a doctor immediately if brake fluid has been swallowed.

–

Rinse the affected area with plenty of water in the event of contact with the skin.

–

Rinse eyes thoroughly with water immediately and consult a doctor if brake fluid comes into contact with the eyes.

–

If brake fluid spills on to your clothing, change the clothing.

Warning

Danger of accidents

Old brake fluid reduces the braking effect.

–

Make sure that brake fluid for the front and rear brake is changed in accordance with the service schedule. (Your authorized

Husqvarna Motorcycles workshop will be glad to help.)

Warning

Environmental hazard

Hazardous substances cause environmental damage.

–

Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with the applicable regula-

tions.

Содержание 701 Supermoto 2017





















































































































































































































Результаты поиска

Содержание 701 Supermoto 2017

Отзывы:

Похожие инструкции для 701 Supermoto 2017

Бренды по названию

Популярные бренды

Husqvarna 701 Supermoto 2017, Руководство пользователя

Результаты поиска

Содержание 701 Supermoto 2017

Отзывы:

Похожие инструкции для 701 Supermoto 2017

Бренды по названию

Популярные бренды