Husqvarna 553RBX, Руководство оператора

Страница: 18 / 284

• Keep the cutting attachment below waist level.
• Always keep the product attached to the harness.
• Keep body parts away from the hot surfaces.
• Keep body parts away from the cutting attachment.
To start the engine
WARNING:
Keep the safety distance of
15 m/49 ft when the engine starts. There is
a risk that the cutting attachment starts to
rotate.
1. Set the stop switch to the start position.
2. Push the air purge bulb until the bulb starts to fill with
fuel.
3. Set the choke control in the choke position.
4. Hold the body of the product on the ground with your
left hand. Do not put your feet on the product.
5. Pull the starter rope handle slowly until you feel
some resistance, then pull the starter rope handle
with force.
WARNING:
Do not wind the starter
rope around your hand.
6. Continue to pull the starter rope handle until the
engine starts.
CAUTION:
Do not pull the starter
rope until it stops. Do not let go of the
starter rope when it is fully extended.
Release the starter rope slowly. Risk of
damage to the product.
7. When the engine starts, put the choke control in the
run position and apply full throttle. The throttle trigger
automatically disengages from the start position.
8. Make sure that the engine runs smoothly.
WARNING:
Keep body parts away
from the spark plug cap to prevent burn
injuries. Risk of burn injuries. Do not use
the product with a damaged spark plug cap.
Risk of electrical shock.
To stop the product
• Move the stop switch to the stop position to stop the
engine.
General work instructions
WARNING:
Be careful when you cut a
tree that is in tension. It can spring back to
its normal position before or after the cut and
hit you or the product, and cause injury.
• Clear an open space at one end of the work area,
and start the work from there.
18 1104 - 009 - 19.05.2022