Husqvarna 550iBTX, Руководство оператора

Страница: 17 / 24

To do a check of the air intake
1. Make sure that the air intake is not blocked.
2. Stop the product and remove unwanted material if it
is necessary.
CAUTION: A blocked air intake
decreases the performance of the
product and can cause the motor to
become too hot.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
3. Make sure that these parts are clean before the
battery is connected to the battery charger or the
product:
a) The terminals on the backpack battery cable.
b) The terminals on the backpack battery adapter.
c) The terminals on the battery charger.
d) The terminals on the backpack blower.
Troubleshooting
User interface
User interface Possible faults Possible action
Green LED Flashes Low battery voltage. Charge the battery.
Red error LED flashes Temperature deviation. Let the product cool down.
The product does not start
Dirt in battery connectors.
Clean with compressed air or a soft
brush.
The battery is off. Start the battery.
Red error LED flashes The product needs servicing. Contact your servicing agent.
Transportation, storage and disposal
Transportation and storage
• Obey the special requirement on package and labels
for commercial transportations, including by third
parties and forwarding agents.
• Speak to a person with special training in dangerous
material before you send the product. Obey all
applicable national regulations.
• Remove the battery for storage or transportation.
• Clean the product and do a full servicing before you
put the product in storage for a long time.
• Store the appliance only in a dry place.
• Attach the product safely during transportation.
Disposal of the battery, battery
charger and product
The symbol below means that the product is not
domestic waste. Recycle it at a recycling station for
790 - 001 - 05.12.2018 17