Husqvarna 545 Mark II, Руководство оператора, Страница: 21 / 128

2. For temperatures below -5°C/23°F or in conditions
with snow, a winter cover is available. Assemble the
winter cover on the starter housing. The winter cover
decreases the flow of cool air and keeps snow away
from the carburetor space.
Note:
Part number for winter cover: 595 96 76-01
CAUTION:
Remove the winter
cover if the temperature increases above
-5°C/23°F. Risk of too high engine
temperature and damage to the engine.
Heated handles (545G Mark II, 550XPG Mark
II, 550XPG Mark II TrioBrake)
The product has heated front and rear handles. The
electrical heating coils are powered by a generator.
Push the switch in the direction of the arrow to engage
the function. Push the switch in the opposite direction to
disengage the function.
Electrical carburetor heating (545G Mark II,
550XPG Mark II, 550XPG Mark II TrioBrake)
Adjustment of the carburetor heating is done electrically
through a thermostat. This keeps the correct carburetor
temperature and prevents ice in the carburetor.
Maintenance
Introduction
WARNING:
Read and understand the
safety chapter before you do maintenance
on the product.
Maintenance schedule
Daily maintenance Weekly maintenance Monthly maintenance
Clean the external parts of the prod-
uct and make sure that there is no oil
on the handles.
Clean the cooling system. Refer to
To clean the cooling system on page
31 .
Do a check of the brake band. Refer
to
To do a check of the brake band
on page 23 .
Do a check of the throttle trigger and
throttle trigger lockout. Refer to
To
do a check of the throttle trigger and
throttle trigger lockout on page 23
.
Do a check of the starter, starter rope
and return spring.
Do a check of the clutch centre,
clutch drum and clutch spring.
Make sure that there is no damage
on the vibration damping units.
Lubricate the needle bearing. Refer
to To lubricate the needle bearing on
page 30
.
Clean the spark plug. Refer to
To do
a check of the spark plug on page
26
.
Clean and do a check of the chain
brake. Refer to To do a check of
the throttle trigger and throttle trigger
lockout on page 23
.
Remove burrs from the edges of the
guide bar. Refer to To do a check of
the guide bar on page 30
.
Clean the external parts of the carbu-
rettor.
544 - 009 - 07.02.2022 21