Husqvarna 529351902 Скачать руководство пользователя страница 5

• Never work from a ladder, stool or any other raised

position that is not fully secured.

• Always ensure you have a safe and stable working

position.

• Always use both hands to hold the product. Hold the

product at the side of your body.

• Make sure that you connect the harness to the

support hook. Only use a single harness.

• Use your right hand to control the throttle/power

trigger .

• If an emergency occurs, let go of the product and let

it fall to the ground.

• Make sure that your hands and feet do not come

near the cutting attachment when the engine/motor

is running.

• When the engine/motor is switched off, keep your

hands and feet away from the cutting attachment

until it has stopped completely.

• Watch out for stumps of branches that can be thrown

out during cutting.

• Always lay the product on the ground when you are

not using it.

• Do not cut too close to the ground. Stones and other

objects can be thrown out.

• Check the working area for foreign objects such as

electricity cables, insects and animals, etc, or other

objects that could damage the cutting attachment,

such as metal items.

• If any foreign object is hit or if vibrations occur,

stop the product immediately. If you have a gasoline

operated product, disconnect the spark plug cap

from the spark plug. If you have a battery operated

product, remove the battery. Check that the product

is not damaged. Repair any damage.

• If anything jams in the blades while you are

working, stop the product immediately. If you have

a gasoline operated product, switch off the engine

and disconnect the spark plug cap from the spark

plug. If you have a battery operated product, switch

off the motor and remove the battery. Make sure the

product has stopped completely before cleaning the

blades.

Other safety information

• Avoid Dangerous Environment – Don’t use

appliances in damp or wet locations.

• Don’t Use In Rain.
• Keep Children Away – All visitors should be kept at a

distance from work area.

• Dress Properly – Do not wear loose clothing or

jewelry. They can be caught in moving parts.

Use of rubber gloves and substantial footwear

is recommended when working outdoors. Wear

protective hair covering to contain long hair.

• Use Safety Glasses – Always use face or dust mask

if operation is dusty.

• Use Right Appliance – Do not use appliance for any

job except that for which it is intended.

• Avoid Unintentional Starting – Don’t carry plugged-in

appliance with finger on switch. Be sure switch is off

when plugging in.

• Don’t Force Appliance – It will do the job better and

with less likelihood of a risk of injury at the rate for

which it was designed.

• Don’t Overreach – Keep proper footing and balance

at all times.

• Stay Alert – Watch what you are doing. Use common

sense. Do not operate appliance when you are tired.

• Store Idle Appliances Indoors – When not in use,

appliances should be stored indoors in dry, and high

or locked-up place – out of reach of children.

• Maintain Appliance With Care – Keep cutting edge

sharp and clean for best performance and to reduce

the risk of injury. Follow instructions for lubricating

and changing accessories. Keep handles dry, clean,

and free from oil and grease.

• Check Damaged Parts – Before further use of the

appliance, a guard or other part that is damaged

should be carefully checked to determine that it will

operate properly and perform its intended function.

Check for alignment of moving parts, binding of

moving parts, breakage of parts, mounting, and any

other condition that may affect its operation. A guard

or other part that is damaged should be properly

repaired or replaced by an authorized service center

unless indicated elsewhere in this manual.

1917 - 001 - 18.07.2022

5

Содержание 529351902

































Отзывы: