Husqvarna 521SSE, Руководство оператора

Страница: 5 / 28

RULES FOR SAFE OPERATION
5
1740274
12.Never operate the machine at high transport speeds on
slippery surfaces. Look behind and use care when operat-
ing in reverse.
13.Disengage power to the collector/impeller when snow-
thrower is transported or not in use.
14.Use only attachments and accessories approved by the
manufacturer of the snowthrower (such as cabs, tire
chains, etc..).
15.Never operate the snowthrower without good visibility or
light. Always be sure of your footing and keep a firm hold
on the handles. Walk, never run.
16.Never touch a hot engine or muffler.
17.Never operate the snowthrower near glass enclosures,
automobiles, window wells, drop − offs, and the like without
proper adjustment of the snow discharge angle.
18.Never direct discharge at bystanders or allow anyone in
front of the unit.
19.Never leave a running unit unattended. Always disen-
gage the auger and traction controls, stop engine, and
remove keys.
20.Do not operate the unit while under the influence of alco-
hol or drugs.
21.Keep in mind the operator is responsible for accidents
occurring to other people or property.
22.Data indicates that operators, age 60 years and above,
are involved in a large percentage of power equipment −
related injuries. These operators should evaluate their
ability to operate the unit safely enough to protect them-
selves and others from injury.
23.DO NOT wear long scarves or loose clothing that could
become entangled in moving parts.
24. Snow can hide obstacles. Make sure to remove all ob-
stacles from the area to be cleared.
Children
Tragic accidents can occur if the operator is not alert to the
presence of children. Children are often attracted to the unit
and the operating activity. Never assume that children will re-
main where you last saw them.
1. Keep children out of the area and under the watchful care
of another responsible adult.
2. Be alert and turn off if children enter the area.
3. Never allow children to operate the unit.
4. Use extra care when approaching blind corners, shrubs,
trees, or other objects that may obscure vision.
Clearing A Clogged Discharge Chute
Hand contact with the rotating impeller inside the discharge
chute is the most common cause of injury associated with
snowthrowers. Never use your hand to clean out the dis-
charge chute.
To clear the chute:
1. SHUT OFF THE ENGINE.
2. Wait 10 seconds to be sure the impeller blades have
stopped rotating.
3. Always use a clean out tool, not your hands.
Service, Maintenance And Storage
1. Check shear bolts and other bolts at frequent intervals for
proper tightness to be sure the equipment is in safe work-
ing condition.
2. Never store the machine with fuel in the tank inside a
building where ignition sources are present such as hot
water and space heaters, or clothes dryers. Allow the en-
gine to cool before storing in any enclosure.
3. Always refer to operator’s manual for important details if
the snowthrower is to be stored for an extended period.
4. Maintain or replace safety and instruction labels as
necessary.
5. Run the machine a few minutes after throwing snow to
prevent freeze − up of the collector/impeller.
6. If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until fuel vapors
have dissipated.
7. Always observe safe refueling and fuel handling practic-
es when refueling the unit after transportation or storage.
8. Always follow the engine’s manual instructions for storage
preparations before storing the unit for both short and
long term periods,
9. Always follow the engine manual instructions for proper
start-up procedures when returning the unit to service.
10.Maintain or replace safety and instruction labels as
necessary.
11. Keep nuts and bolts tight and keep equipment in good
condition.
12.Never tamper with safety devices. Check their proper
operation regularly and make necessary repairs if they
are not functioning properly.
13.Components are subject to wear, damage, and deteriora-
tion. Frequently check components and replace with
manufacturer’s recommended parts, when necessary.
14.Check control operation frequently. Adjust and service as
required.
15.Use only factory authorized replacement parts when mak-
ing repairs.
16.Always comply with factory specifications on all settings
and adjustments.
17.Only authorized service locations should be utilized for
major service and repair requirements.
18.Never attempt to make major repairs on this unit unless
you have been properly trained. Improper service pro-
cedures can result in hazardous operation, equipment
damage and voiding of manufacturer’s warranty.
19.Check shear bolts (pins) and other bolts at frequent inter-
vals for proper tightness to be sure the equipment is in
safe working condition.
Emissions
1. Engine exhaust from this product contains chemicals
known, in certain quantities, to cause cancer, birth de-
fects, or reproductive harm.
2. If available, look for the relevant Emissions Durability
Period and Air Index information on the engine emissions
label.