Husqvarna 520iLX, Руководство оператора

Страница: 6 / 40

General power tool safety warnings
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
Note: Save all warnings and instructions for future
reference. The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
Check before starting
•
Always remove the battery to
prevent the product being
started by accident. Always
remove the battery before any
maintenance on the product.
•
Before using the product and
after any impact, check for
signs of wear or damage and
repair as necessary.
•
Inspect the working area.
Remove all loose objects,
such as stones, broken glass,
nails, steel wire, string etc.
that could be thrown out or
become wrapped around the
cutter or cutter guard.
•
Check the motor for dirt and
cracks. Clean off grass and
leaves from the engine using
a brush. Gloves should be
worn when necessary.
•
Check that the trimmer head
is completely attached to the
trimmer.
•
Check that the product is in
perfect working order. Check
that all nuts and screws are
tight.
•
Check that the trimmer head
and trimmer guard are not
damaged or cracked. Replace
the trimmer head or trimmer
guard if the have been
exposed to impact or are
cracked. Always use the
recommended guard for the
cutting attachment you are
using. See chapter on
Technical data.
•
The product operator must
ensure that no people or
animals come closer than 15
meters while working. When
several operators are working
in the same area the safety
distance should be at least 15
meters.
•
Carry out an overall
inspection of the product
before use. See the
maintenance schedule.
•
National or local regulations
may regulate the use. Comply
to given regulations.
Check before starting
• Always remove the battery to prevent the product
being started by accident. Always remove the battery
before any maintenance on the product.
• Before using the product and after any impact, check
for signs of wear or damage and repair as
necessary.
• Inspect the working area. Remove all loose objects,
such as stones, broken glass, nails, steel wire, string
6 756 - 001 - 24.10.2018