Husqvarna 42" Collection System, Руководство оператора и каталог запасных частей

Страница: 9 / 20

9
7
INSTALLING CHUTES
1. Place middle chute over the top end of the blower
assembly. Stretch the chute latch on the blower
assembly up and onto the acorn nut on the middle
chute.
NOTE: The kit provides parts for both the 42" and
48". Use the shorter upper chute for a 42" collection
system. Use the longer upper chute for the 48"
collection system.
2. Slide the upper chute discharge end into the
hood inlet and fit the lower end over middle chute.
Secure middle chute to upper as in Step 1.
3. Rotate the chute so the opening is facing
downwards toward the container bags.
Middle Chute
6
MOUNTING COVER ASSEMBLY
NOTE:
Assistance from another person may ease
mounting the cover assembly to mower.
1. Lift and rotate cover to align the cover brackets
with support assembly tubes.
2. Slide the cover down over the support tubes until
secure.
8063-082
8063-089
1. Position upper chute support against bagger inlet,
flush at outer edges. See Illustration.
2. Using support as a template, drill two
3
/
8
holes into
bagger hood.
Bagger Inlet
Flex Trim
3. Secure upper chute support to hood with hex
bolts, washers and nyloc nuts. Use the illustration
for hardware orientation.
4. Slide the flex trim over the support and bagger
edge.
5
INSTALLING CHUTE SUPPORT
Upper Chute
Support
Upper Chute
Support
ASSEMBLY
8063-047
8063-048
Chute Latch