manualshive.com logo in svg

Husqvarna 357XP 359, Руководство оператора

Поделиться
Скачать
Husqvarna 357XP 359 Скачать руководство пользователя страница 33

MAINTENANCE

English

 –

 33

Checking, maintaining and 
servicing chain saw safety 
equipment

Chain brake and front hand guard

Checking brake band wear

Brush off any wood dust, resin and dirt from the chain 
brake and clutch drum. Dirt and wear can impair 
operation of the brake.

Regularly check that the brake band is at least 0.6 mm 
thick at its thinnest point.

Checking the front hand guard

Make sure the front hand guard is not damaged and that 
there are no visible defects such as cracks.

Move the front hand guard forwards and back to make 
sure it moves freely and that it is securely anchored to the 
clutch cover.

Checking the inertia brake release

Place the chain saw, with the engine switched off, on a 
stump or other stable surface. Release the front handle 
and let the saw fall by its own weight, rotating around the 
rear handle towards the stump.

When the bar hits the stump the brake should be 
applied.

Checking the brake trigger

Place the chain saw on firm ground and start it. Make sure 
the chain does not touch the ground or any other object. 
See the instructions under the heading Start and stop.

Grasp the chain saw firmly, wrapping your fingers and 
thumbs around the handles.

Note! All service and repair work on the machine 
demands special training. This is especially true of the 
machine’s safety equipment. If your machine fails any 
of the checks described below we recommend that you 
take it to your service workshop. 

Содержание 357XP 359













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды