Husqvarna 330LK, Руководство оператора

Страница: 7 / 72

• Use gloves when necessary, for example when
you attach, examine or clean the cutting
equipment.
• Use protective boots with steel toes and non-slip
soles.
• Use clothing made of a strong fabric. Always use
heavy, long pants and long sleeves. Do not use
loose clothing that can catch on twigs and
branches. Do not wear jewelry, short pants,
sandals or go with bare feet. Put your hair up
safely above shoulder level.
• Keep first aid equipment close at hand.
Safety devices on the product
WARNING:
Read the warning
instructions that follow before you use
the product.
In this section the product’s safety features, its
purpose and how checks and maintenance should
be carried out to ensure that it operates correctly.
See instructions under the heading
Introduction on
page 2 to find where these parts are located on your
product.
The life span of the product can be reduced and the
risk of accidents can increase if product
maintenance is not carried out correctly and if
service and/or repairs are not carried out
professionally. If you need further information please
contact your nearest servicing dealer.
WARNING:
Never use a product
with defective safety components. The
product's safety equipment must be
inspected and maintained as described
in this section. If your product fails any of
these checks, contact your service agent
to get it repaired.
CAUTION:
All servicing and repair
work on the machine requires special
training. This is especially true of the
machine′s safety equipment. If your
machine fails any of the checks
described below you must contact your
service agent. When you buy any of our
products we guarantee the availability of
professional repairs and service. If the
retailer who sells your machine is not a
servicing dealer, ask him for the address
of your nearest service agent.
To do a check of the throttle trigger lockout
The throttle lockout is designed to prevent accidental
operation of the throttle control.
1. Press the throttle trigger lockout (A) and make
sure that the throttle control is released (B).
When you release the handle the throttle control
and the throttle trigger lockout both move back to
their initial positions. This movement is controlled
by two independent return springs. This
arrangement means that the throttle control is
automatically locked at the idle setting.
A
B
2. Make sure that the throttle control is locked at the
idle setting when the throttle trigger lockout is
released.
3. Press the throttle trigger lockout and make sure
that it returns to its intial position when you
release it.
1660 - 003 - 29.09.2021 7