English
– 7
SAFETY INSTRUCTIONS
•
See instructions under the heading Start. Start the
machine and apply full throttle. Release the throttle and
check that the cutting attachment stops and remains at a
standstill. If the cutting attachment rotates with the throttle
in the idle position then the carburettor idle setting must be
checked. See instructions under the heading
Maintenance.
Stop switch
•
Start the engine and make sure the engine stops when
you move the stop switch to the stop setting.
Cutting attachment guard
•
Ensure that the guard is undamaged and is not cracked.
•
Replace the guard if it has been exposed to impact or is
cracked.
•
Always use the recommended guard for the cutting
attachment you are using. See chapter on Technical data.
Vibration damping system
•
Regularly check the vibration damping units for cracks or
deformation.
•
Check that the vibration damping element is undamaged
and securely attached.
Muffler
•
Never use a machine that has a faulty muffler.
•
Regularly check that the muffler is securely attached to
the machine.
•
If the muffler on your machine is fitted with a spark
arrestor mesh then it should be cleaned regularly. A
blocked mesh causes the engine to overheat, which can
lead to serious damage. Never use a muffler with a
defective spark arrestor mesh.
Cutting equipment
This section describes how to choose and maintain your
cutting equipment in order to:
•
Reduce the risk of blade thrust.
•
Obtain maximum cutting performance.
•
Extend the life of cutting equipment.
General rules
1
Only use cutting attachments with the guards we
recommend! See the chapter on Technical data.
Содержание 324R X-Series
