Husqvarna 324HDA55X series, Руководство оператора

Страница: 19 / 24

English
– 19
MAINTENANCE
Oiling the air fi lter
Always use HUSQVARNA fi lter oil, art. no. 531 00 92-48. The
fi lter oil contains a solvent to make it spread evenly through
the fi lter. You should therefore avoid skin contact.
Put the fi lter in a plastic bag and pour the fi lter oil over it.
Knead the plastic bag to distribute the oil. Squeeze the
excess oil out of the
fi lter inside the plastic bag and pour off
the excess before fi tting the fi lter to the machine. Never use
common engine oil. This would drain through the fi lter quite
quickly and collect in the bottom.
Gear housing
There is a grease nipple and a plug for fi lling lubricant on the
gear housing. Use a grease gun to fi ll with grease. This should
be done after every 60 working hours. Use Husqvarna’s
special grease, no. 503 98 96-01.
CAUTION! The gear housing must not be fi lled completely
with grease. The grease expands as the machine heats up
during operation. If the gear housing was completely
fi lled
with grease it could damage the seals and lead to leakage of
grease.
The grease in the bevel gear does not normally need to be
changed except if repairs are carried out.
Cleaning and lubrication
Clean any resin and plant residue from the blades using
cleaning agent 531 00 75-13 (UL22) before and after using
the machine.
Lubricate the blade bars with special grease, part no. 531 00
75-12 (UL 21) before long periods of storage.