Husqvarna 322E Скачать руководство пользователя

Страница: 2 / 24

– English

EXPLANATION OF SYMBOLS

Symbols

WARNING! The edger can be
dangerous!
Careless or incorrect use can result
in serious or fatal injury to the
operator or others.

Always use:
• A protective helmet where there is

a risk of falling objects.

• Ear protection
• Approved eye protection

Read through the Operator's
Manual carefully and understand
the content before using the
machine.

• Max. speed of output axle, rpm

• This product is in accordance with

applicable CE directives.

• Beware of thrown objects and

ricochets.

• Warning for rotating blade.

Keep hands and feet clear.

• The operator of the machine must

ensure that no persons or animals
comes within a 15 metre radius
while working.

10000 rpm

max

50FT

15 m

50FT

15 m

• Warning! The blade continues to

rotate even after the engine has
stopped.

When the engine has stopped,
stop the blade from rotating by
letting the blade come in contact
with the ground.

Indicates the direction of rotation.

Checks and/or maintenance should
be carried out with the engine
switched off, with the stop switch in
the STOP position.

Always wear approved protective
gloves.

Regular cleaning required.

Ocular control.

Approved eye protection must
always be used.

• Arrows which show limits for

handle mounting.

• Always wear approved protective

gloves.

• Use anti-slip and stable boots.

Other symbols/decals on the machine refer to
special certification requirements for certain
markets.

Содержание 322E

























Результаты поиска

Содержание 322E

Отзывы:

Похожие инструкции для 322E

Бренды по названию

Популярные бренды

Husqvarna 322E, Руководство оператора

Результаты поиска

Содержание 322E

Отзывы:

Похожие инструкции для 322E

Бренды по названию

Популярные бренды