STARTING AND STOPPING
English
–
19
Starting and stopping
Cold engine
Starting:
The chain brake must be engaged when the
chain saw is started. Activate the brake by moving the
front hand guard forwards.
61
Ignition; choke:
Slide the ignition switch to the left.
Choke:
Set the choke control in the choke position.
Start throttle:
1
Push down the throttle trigger lockout (A).
2
Open the throttle fully (B).
3
Push the throttle latch downwards (C).
272 XP/XPG
Ignition:
Slide the ignition switch to the left.
Choke:
Set the choke control in the choke position.
Start throttle:
The correct choke/start throttle setting is
obtained by moving the control to the choke position.
If the machine is fitted with a decompression valve (A):
Press the valve to reduce the pressure in the cylinder and
make starting easier. You should always use the
decompression valve when starting the machine. Once
the machine has started the valve will automatically return
to its original setting.
Warm engine
Use the same starting procedure as for a cold engine but
without setting the choke control in the choke position.
Starting
Grip the front handle with your left hand. Hold the chain
saw on the ground by placing your right foot through the
rear handle. Pull the starter handle with your right hand
and pull out the starter cord slowly until you feel a
resistance (as the starter pawls engage) then pull firmly
and rapidly.
Never twist the starter cord around your
hand.
As the chain brake is still engaged the speed of the engine
must be set to idling as soon as possible, this is achieved
by quickly disengaging the throttle lock. This prevents
!
WARNING! Note the following before
starting:
Never start a chain saw unless the bar,
chain and all covers are fitted correctly.
Otherwise the clutch can come loose and
cause personal injuries.
Always move the machine away from the
refuelling area and source before
starting.
Place the machine on firm ground. Make
sure you have a secure footing and that
the chain cannot touch anything.
Keep people and animals well away from
the working area.
A
Содержание 272XP
Страница 41: ......
Страница 42: ......
Страница 43: ......
Страница 44: ...1153157 26 z U h 6Z z U h 6Z 2015 01 26 Original instructions ...