background image

16

care label. The fit of the protective apparel/boot
is not covered under warranty.
30 Day Warranty:

Replacement parts, ac-

cessories including bars and chains, tools and
display items.

SECTION 2: HUSQVARNA’S OB-

LIGATIONS UNDER THE WARRANTY

Husqvarna will repair or replace defective com-
ponents without charge for parts or labor if a
component fails because of a defect in material
or workmanship during the warranty period.

SECTION 3: ITEMS NOT COVERED

BY THIS WARRANTY

The following items are not covered by this
warranty:
(1)Normal customer maintenance items

which become worn through normal regu-
lar use, including, but not limited to, belts,
blades, blade adapters, bulbs, filters,
guide bars, lubricants, rewind springs,
saw chains, spark plugs, starter ropes
and tines;

(2) Natural discoloration of material due to ul-

traviolet light.

(3) Engine and drive systems not manufac-

tured by Husqvarna; these items are cov-
ered by the respective manufacturer’s
warranty as provided in writing with the
product information supplied at the time
of purchase; all claims must be sent to the
appropriate manufacturer.

(4) Lawn and garden attachments are cov-

ered by a third party which gives a war-
ranty; all claims for warranty should be
sent to the manufacturer; and

(5) Emission control system components

necessary to comply with CARB--TIER II
and EPA regulations which are manufac-
tured by third party engine manufacturer.

SECTION 4: EXCEPTIONS AND

LIMITATIONS

This warranty shall be inapplicable to de-
fects resulting from the following:
(1) Accident, abuse, misuse, negligence and

neglect, including stale fuel, dirt, abra-
sives, moisture, rust, corrosion, or any
adverse reaction due to incorrect storage
or use habits.

(2) Failure to operate or maintain the unit in ac-

cordance with the instruction manual or in-
struction sheet furnished by Husqvarna.

(3) Alterations or modifications that change

the intended use of the product or affects
the product’s performance, operation,
safety, or durability, or causes the product
to fail to comply with any applicable laws.

(4) Additional damage to parts or compo-

nents due to continued use occurring af-
ter any of the above.

REPAIR OR REPLACEMENT AS PRO-
VIDED UNDER THIS WARRANTY IS THE
EXCLUSIVE REMEDY OF THE PUR-
CHASER. HUSQVARNA SHALL NOT BE

LIABLE FOR ANY INCIDENTAL OR CON-
SEQUENTIAL DAMAGES FOR BREACH
OF ANY EXPRESS OR IMPLIED WAR-
RANTY ON THESE PRODUCTS EXCEPT
TO THE EXTENT PROHIBITED BY APPLI-
CABLE LAW. ANY IMPLIED WARRANTY
OR MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE ON
THESE PRODUCTS IS LIMITED IN DURA-
TION TO THE WARRANTY PERIOD AS
DEFINED IN THE LIMITED WARRANTY
STATEMENT. HUSQVARNA RESERVES
THE RIGHT TO CHANGE OR IMPROVE
THE DESIGN OF THE PRODUCT WITH-
OUT NOTICE, AND DOES NOT ASSUME
OBLIGATION TO UPDATE PREVIOUSLY
MANUFACTURED PRODUCTS.
Some states do not allow the exclusion of inci-
dental or consequential damages, or limitations
on how long an implied warranty lasts, so the
above limitations or exclusions may not apply
to you. This warranty gives you specific legal
rights, and you may also have other rights
which vary from state to state.

SECTION 5: CUSTOMER RE-

SPONSIBILITIES

The product must exhibit reasonable care,
maintenance, operation, storage and general
upkeep as written in the maintenance section
of the Owner’s/Operator’s manual. Should an
operational problem or failure occur, the prod-
uct should not be used, but delivered as is to an
authorized Husqvarna dealer for evaluation.
Proof of purchase, as explained in Section 6,
rests solely with the customer.

SECTION 6: PROCEDURE TO OB-

TAIN WARRANTY CONSIDERATION

It is the Owner’s and Dealer’s responsibility
to make certain that the Warranty Registra-
tion Card is properly filled out and mailed to
Husqvarna Forest & Garden Company. This
card should be mailed within ten (10) days
from the date of purchase in order to confirm
the warranty and to facilitate post--sale ser-
vice.
Proof of purchase must be presented to the
authorized Husqvarna dealer in order to ob-
tain warranty service. This proof must in-
clude date purchased, model number, serial
number, and complete name and address of
the selling dealer.
To obtain the benefit of this warranty, the
product believed to be defective must be de-
livered to an authorized Husqvarna dealer in
a timely manner, no later than thirty (30) days
from date of the operational problem or fail-
ure. The product must be delivered at the
owner’s expense.

Pick--up and delivery

charges are not covered by this warranty.
An authorized Husqvarna dealer can be nor-
mally located through the “Yellow Pages” of
the local telephone directory or by calling
1--800--HUSKY62 for a dealer in your area.

7349 Statesville Road

CHARLOTTE, NC 28269

Содержание 136



















Отзывы: