ASSEMBLY
12 – English
Trimmer guard
•
Slide the trimmer guard into the trimmer head.
(Figure 34)
•
Fasten the trimmer guard onto the housing to the
trimmerhead.
(Figure 35)
Fitting the trimmer head
•
Turn the output shaft until one of the holes in the drive
disc aligns with the corresponding hole in the gear
housing.
•
Insert the locking pin into the hole to lock the shaft.
•
Screw on the trimmer head in the opposite direction to
the direction of rotation.
•
To dismantle, follow the instructions in the reverse
order.
(Figure 33)
Fitting the loop handle
•
Fit the screw into the loop handle.
•
Slide the loop handle into the fitting on the shaft.
•
Tighten the screw that secures the loop handle.
(Figure 36)
•
Now adjust the trimmer to give a comfortable working
position.
(Figure 11)
Fitting the plant guard
•
Install plant protection in the holes on the trimmer
head.
(Figure 37)
