Husqvarna 11 C, Руководство оператора

Страница: 15 / 44

English
– 15
PRESENTATION
Release lever Rider 13 C, Rider 16 C
The release control must be pulled out in order for the
machine to be moved when the engine is shutoff. Pull the
controls to the end positions, do not use an intermediate
position.
• Pull out the control to disengage the drive system.
• Push in the control to engage to the drive system.
Release lever Rider 16 AWD
Rider 16 AWD has one control for the front axle and one
control for the rear axle.
Should you attempt to drive the machine with the clutch
controls pulled out it will not move. The drive on the axle is
disengaged when one of the controls is pulled out.
Clutch control, rear axle
• Control drawn out, drive system disengaged.
• Control depressed, drive system engaged.
Clutch control, front axle
The control is positioned on the inside of the left front wheel.
• Rear control (pulled out), drive system disengaged.
• Front control (pushed in), drive system engaged.
IMPORTANT!
Always drive the machine with both clutch controls pressed
in.