Husqvarna Viking Scandinavia 200 Скачать руководство пользователя страница 24

22

 

 

 

Sewing

 

Twenty-fi ve Needle Positions

Your Scandinavia 200 has twenty-fi ve 
different needle positions for the most 
accurate seaming and topstitching 
ever. When sewing straight stitch or 
reinforced straight stitch, the needle 
positions can be adjusted in steps. 
Take advantage of the different needle 
positions to edge stitch and top stitch.

Fabric:

 Woven medium

00

80

Sew:

• Fold fabric in two and put it in 

position under the presser foot. Lower 
the presser foot and step on the foot 
control. 

• Touch 

+

 on the stitch width button

 

to 

move the needle 12 steps into the left 
needle position 

• Touch 

 

to move needle 24 steps 

into the right needle position 

.

• Touch stitch width 

-

 to move the 

needle back to center position 

.

Each touch on stitch width (

-

 or 

+

corresponds to a 0.25 mm adjustment of 
the needle position.

To get the maximum feed when edge 
stitching close to the edge, place the 
fabric and sew with left needle position 
so the edge follows the inside right 
edge of the Utility Foot D, or the fi rst 
mark of the left edge of the Utility Foot 
A. Use Utility Foot A when sewing light 
fabrics and Utility Foot D for other 
fabrics.

Содержание Scandinavia 200













































Отзывы: