manualshive.com logo in svg

Husqvarna Viking Huskystar EM10, Руководство пользователя, Страница: 17 / 48

Поделиться
Скачать
Husqvarna Viking Huskystar EM10 Скачать руководство пользователя страница 17

15

GET READY TO EMBROIDER

Needle Threader

After placing the thread behind the 

fi

 nal guide just above the needle, 

you can thread the needle using 
the built-in needle threader.
1.   With the presser foot raised 

and the needle in the 
up position, bring thread 
through upper thread path as 
described on the preceding 
page. 

2.   Lower the presser foot. Lower 

and move the threader lever 
forward until it stops. A small 
hook comes through the eye 
of the needle.

3.   Pull the thread across the 

threader from left to right. 

4.   Gently move the threader lever 

up and back. The hook will pull 
the thread through the eye.

5.   Grasp the loop of thread 

behind the eye of the and pull 
out a length of thread.

If the needle 
threader does not 
thread the needle, 
check to assure that 
it is aligned with the 
eye of the needle 
and that the needle 
is inserted as high 
as it will go in the 
slot.

Take care that you 
do not press the 
Start/Stop button 
during threading.

Содержание Huskystar EM10

















































Отзывы:

Нет отзывов