Husqvarna Viking Emerald 116, Руководство пользователя

Страница: 12 / 48

10
Changing the Needle
Turn off the power switch.
Your machine uses standard sewing
machine needles.
1
Lower the presser foot. Loosen the
screw in the needle clamp by turning
it counterclockwise. Remove the
needle.
2
Push up the new needle as far as it
will go with the Á at side away from
you. Tighten the screw À rmly by
turning it clockwise.
a Stop
b Flat side
c Needle clamp screw
To check for a good needle:
Put the Á at side of the needle onto
something Á at (needle plate, glass etc.).
The gap between the needle and the Á at
surface should be consistent.
Never use a blunt needle. A damaged
needle can cause permanent snags or
runs in knits,
À ne silks and silk-like-
fabrics.
NOTE:
Check the needle frequently for
barbed or blunt points.
a
b
c
c
2 1