Operating the machine – 27
POP-UP MESSAGES
Bobbin Winding On
This pop-up message appears when the bobbin winding
spindle is pushed to the right and bobbin winding is
activated.
Presser Foot too High
Your machine will not sew if there is too much fabric under
the presser foot. Remove some of the fabric or use another
fabric. Press the OK button, or tap the foot control to close
the pop-up message.
Machine Set for Twin Needle
When you have set the machine for twin needle in the
SET Menu, a pop-up message is shown to remind you of
the setting when you turn on your machine. Press the OK
button or tap the foot control to close the pop-up message.
Stitch Width Limited for Twin Needle
This message is shown when the machine is set for twin
needle and you try to adjust the stitch width to wider than
possible with the twin needle. Close the pop-up message by
pressing the OK button.
Machine Set for Straight Stitch
This message is shown when the stitch width safety is on
and you turn on the machine or try to adjust the stitch
width. Close the pop-up message by pressing the OK
button.
This Stitch Cannot be Sewn with Twin Needle
This pop-up message appears when the machine is set for
twin needle and you select a stitch that cannot be sewn
with twin needle. Press the OK button to close the pop-up
message.
