25
104 72 47-26
10. The needle height
Check
1. Bring the needle into its lower turning position.
2. The gap between the upper end of the needle and the surface (B)
of the hook ring should be 29.15 ± 0.2 mm.
The check is executed with a polished needle 90 which is 29.15 mm long.
Order nr. 412 35 29 - 01
Adjustment
1. Bring the needle to its lower turning position.
2. Loosen screw (A) and move the needle bar until the correct
measure is obtained.
3. Tighten the screw.
NOTE!
Check by means of a twin needle that the needle bar is not
twisted. May cause jump stitches when sewing with a twin needle.
Settings
