EN
© 2022 HUSLOG
All rights reserved
Touchless thermometer
12
3.2 Package content
1.
Touchless thermometer
2.
Case
3.
3 V
⎓
, 2 x AAA battery 1,5 V
⎓
4.
User Manual
If any of the above items is missing or damaged, please contact your
dealer.
We advise to keep the container in case of any complaints. Keep the
container out of reach of children.
You print a version of the user manual with the large font size or
download it from the web address below:
https://mptech.eu/qr/huslog
Or by scanning the QR code below:
4. Device construction
1.
Function button
2.
Display
3.
Flap of the battery compartment
4.
M button
5.
Infrared sensor
5. Operation of the device
5.1 Installation and replacement of batteries
Slide the battery compartment flap (3) towards the bottom of the unit and
remove it. When replacing batteries, always replace the complete set of
two batteries and dispose of them according to regulations. Place a new
set of batteries in the battery compartment according to the polarity
marking inside the battery compartment.
Close the battery compartment by sliding the tab back into place so that
the latch engages and secures the compartment against opening.
If you do not plan to use the thermometer for several months or longer,
remove the batteries from the battery compartment.
5.2 Temperature measurement
Do not touch the sensor with your fingers or other objects.
If the ambient temperature has changed significantly (e.g. change of
room), leave the thermometer for about 30 minutes to adjust to it. Make
sure that the ambient temperature is within the operating temperature range of
the instrument (10 -
40 ºC) before taking the measurement.
Take temperature measurements in a stable environment. If the ambient
temperature changes, check that the infrared sensor is not fogged up.
1
2
4
5
3
