Husky HUS-HN5 Скачать руководство пользователя страница 3

Страница: 3 / 9

HUSKY INSTRUCTION MANUAL

DISPOSAL OF OLD APPLIANCES

BE SURE TO MAKE ANY LOCKS UNUSABLE. IF POSSIBLE, REMOVE THE
DOOR(S) AND DISCARD SEPARATELY.
WARNING – CHEMICAL HAZARD: DO NOT ALLOW CHILDREN TO PLAY
WITH THE OLD APPLIANCE. CONTACT YOUR LOCAL AUTHORITY FOR
PROPER DISPOSAL PROCEDURES.

Before disposing of an old appliance, please make sure it is switched off and safe. Unplug the
appliance and break any locks in order to avoid children becoming trapped.

Please note:

the cooling system may contain gases and refrigerants which require

specialist waste disposal.
Contact your local waste disposal depot for proper disposal of an old appliance and contact
your local authority if you have any questions.
Please ensure the pipework of your appliance is not damaged prior to disposal.

DISPOSAL OF PACKAGING

All the packaging materials with your Husky appliance may be disposed of without danger to
the environment.
The cardboard carton and polythene wrappers are recyclable – check with your local authority
for the best recycling options. The expanded polystyrene materials included in the packaging can
be placed in general waste.

ELECTRICAL SAFETY

THIS APPLIANCE MUST BE PLUGGED INTO AN EARTHED SOCKET.

• Before switching on, make sure that the voltage of your electricity supply is the same

as that on the rating plate. This appliance is designed to operate on 220~240V AC;
50Hz. Connection to any other power source may damage the appliance

• This appliance may be fitted with a non-rewireable plug. If it is necessary to change

the fuse in the plug, the fuse cover must be refitted. If the fuse cover is lost or
damaged, the plug must not be used until a suitable replacement is found

• If the plug has to be changed, because it not suitable for your socket or becomes damaged

in any way, it should be replaced by a qualified electrician. The plug removed must be
disposed of safely as insertion into a 13 Amp socket could cause an electrical hazard

• Always remember to unplug your appliance before cleaning.

HOW TO MINIMISE THE ENERGY CONSUMPTION OF YOUR

HUSKY APPLIANCE

• Locate the coolest area of the room, away from sources of heat, and out of the direct

sunlight. One characteristic of thermoelectric units is the length of time it requires to
recover from having the door opened and shut frequently. It may be necessary to wait
longer for the temperature to return to its former level once the door has been
opened for too long. This is normal for this type of unit.

• Energy consumption will be lower if the appliance stands in a well ventilated space and

in particular if the vent at the back of the appliance is clear of obstruction

• Do not place the appliance in direct sunlight or near a heat source such as ovens,

radiators, heaters, etc as this will increase energy consumption

• Keep the door closed as much as possible. Ensure there are no obstructions

preventing the doors from closing properly

• Setting the temperature to a colder temperature means higher energy consumption,

so set only as cool as you really require

• Do not overfill the appliance - overfilling means the cool air cannot circulate freely inside

the cabinet which may slow the process of cooling and make the cabinet less efficient

• Turn the appliance off completely if it is not required for a period of days or longer to

avoid wasting energy (see also section ‘When your appliance is not in use’).

HANDLING YOUR APPLIANCE

• To lift the appliance safely, tilt it backwards by no more than 45 degrees, hold the base

and rear corners of the appliance carefully. Never use the door handles for lifting

• This appliance is heavy and could cause injury. Ensure there are adequate people

present to move the appliance

If moving the appliance:

• Remove all bottles

• Securely tape down the loose shelves inside the appliance

• Tape the door shut

• Protect the outside of appliance with a blanket, or similar item

• Ensure that the appliance stays in an upright position during transportation.

POSITIONING YOUR APPLIANCE

This appliance is a free standing appliance and should
not be built in.

It is recommended that you site the Drinks Cooler in a room where the ambient temperature
is maintained between 18º-25ºC/41º-77ºF.
If the ambient temperature of the unit is outside this range, particularly during extreme hot or
cold conditions, performance may be affected. It is entirely normal that the temperature on the
display fluctuates from the set temperature. This may also occur due to other factors such as
opening the door frequently. For this reason it is not suitable to locate the Drinks Cooler in
outdoor buildings including conservatories and garages.

• Temperature Range For Your Drinks Cooler:

NOTE: When you use the appliance for the first time or restart it after having
been turned off for a long time, there may be a few degrees difference between
the temperature you select and the one indicated on the LED readout. This is
normal. Once the drinks cooler has been running for a few hours the display will
stabilise, but will often fluctuate from the temperature set.

• Ensure that the appliance is situated:

• Away from direct sunlight and in a dry and well-ventilated space

• Away from stoves, ovens, radiators and any other heating appliances

• With a recommendation of at least 15cm clearance around the appliance

• Do not position the appliance in conservatories or outbuildings with extreme high or

low ambient temperatures

• Do not use outdoors or leave in rain

• Do not place anything on your appliance

• The appliance must be used in the vertical position and stand on an even, flat surface

for quieter operation

• If your appliance is to be to be placed on carpet, support it with a wooden board

underneath. Be aware that placing the appliance on carpet may mean that heat from
the compressor may cause the carpet to fade