Hardware Installations
2-5
2-4.2 Wiring The Power Inputs
Follow the steps below to wire the power inputs.
Be sure to disconnect the power cord before installing and/or wiring your switch.
Be sure of the maximum possible current when wiring connections. If the current goes above
the maximum ratings, the wire could overheat and result in serious damage to your switch.
1. Insert the positive and negative wires of your DC supply into the corresponding V+ and V- contacts of the
terminal block.
2. Tighten the screws to prevent the DC wires from coming detached.
The acceptable wire range is 12 to 24 AWG.
