6
Attach the Top Locker to the Hutch
2
AA
BB
4
Kwikset Smartkey® Lock Operation
□
□
□
□
Open the Top Locker door.
Attach the Top Locker (A) using 4 pcs M8*60 flat bolts (AA) and 4 pcs washers (BB) with supplied Hex Key (DD) in
the 4 corners.
Once the Top Locker is flush along the front and sides of the Hutch, tighten the bolts.
Be careful not to overtighten.
If desired, the 2 Side Handles (B) can be attached to the ends of the Top Locker (A), or removed.
3
Plastic Plugs
EE
FF
□
Insert the Plastic Plugs (EE&FF) into the remaining open holes on the side and top walls of the Top Locker (A) per the
diagram below.
□
□
This product has been equipped with the Kwikset Smartkey® locks which allow you to easily program each lock
cylinder to a specific key code to match other Kwikset keyed products.
The lock cylinders have been factory keyed to the corresponding alphabetic lettering found on the Kwikset Smartkey®
label located on the back of the key chain, as well as affixed to the product itself.
Please see the Kwikset Smartkey® supplemental instructions for keying and re-keying the locks.
□
D
Retain This Label
For Key Identification
ONE KEY FOR ALL YOUR LOCKS
TM
