![Husky HN7 'Reflections Скачать руководство пользователя страница 5](http://html.mh-extra.com/html/husky/hn7-reflections/hn7-reflections_owners-manual_2187917005.webp)
H U S k Y D U A L - Z O N E W I N E C O O L E R
5
Setting the temperature control
Your Husky Wine Cooler is fitted with an automatic control panel lock that
activates 12 seconds after the last time a button has been touched. To unlock
the panel press the UP and DOWN buttons simultaneously for three seconds.
You will hear a ‘beep’. The panel is now active for 12 seconds.
You can display the temperature in either Celsius or Fahrenheit by pressing
the °F/°C button for three seconds. REMEMBER: you will need to unlock the
control panel first (see above).
The temperatures for the upper and the lower compartments may be set
independently. Note: the factory default setting is 12°C/54°F.
To adjust the temperature press SET and the upper display will flash. Set the
desired temperature by pressing the UP or DOWN buttons on the control
panel. The set temperature will increase by 1ºF or 1ºC for each depression of
the UP button. The temperature will decrease by 1ºF or 1ºC for each
depression of the DOWN button.
Press SET again and the lower display will flash. Set the desired temperature
by pressing the UP or DOWN buttons as described above.
Capacity
You may place up to 24 standard-sized 75cl bottles in this wine cooler: 8 in
the upper compartment and 16 in the lower compartment. As bottles differ
widely in size the actual number of bottles may vary.
Interior light
The interior light may be turned ON or OFF by pushing the button marked
with the “Light” symbol. The light will turn off automatically after 10 minutes.
CLEANING
CAUTION: Failure to unplug the Wine Cooler could result in electrical shock or
personal injury.
• Unplug the Wine Cooler, and remove all items including shelves.
• Wipe the inside surfaces with a damp cloth soaked in a solution of
two tablespoons of ordinary baking soda to a litre of water. Do not
use abrasive cleaners.
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth when cleaning area of
the controls, or any electrical parts.
• Wipe the outside cabinet with a solution of warm water and mild
liquid detergent. Rinse well and wipe dry with a clean soft cloth.