Husky H72CH9HD Скачать руководство пользователя страница 3

NOTE : 

             This equipment has been tested and found to 
comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against 
harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications.However, there 
is no guarantee that interference will not occur in 
a particular installation.
 
If this equipment does cause harmful interference to 
radio or television reception, which can be determined 
by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or 
more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and 

receiver.

 Connect the equipment into an outlet on a circuit 

different from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV 

technician for help.

 

NOTE : 

             This device complies with Part 15 of the FCC 
Rules. Operation is subject to the following two 
conditions: (1) this device may not cause harmful 
interference, and 
(2) this device must accept any interference received, 
including interference that may cause undesired 
operation.

 

HUSKYTOOLS.COM

 

3

Please contact 1-888-HD-HUSKY

 

 

for further assistance.

 

 

Do NOT insert extension cord through hole without grommet 
in place.

Check the insulation and plugs of extension cord before
using. Do NOT use cord if it is worn or damaged.

Only use a three-wire extension cord with all three prongs
intact. Never remove the round grounding prong.

Extension cord must be connected to a 125 Volt GFCI
protected outlet with proper ground. If GFCI outlet is not
available, use an extension cord with GFCI protection 
built in.

Do NOT overload extension cord.

Remove extension cord from the hole
before moving or transporting storage chest.

Only use an extension cord that is rated for outdoor use.

Do NOT connect extension cord to outlet that also sup-
plies critical safety equipment with power. 

4.  Extension cord

 

5.   Electrical Shock Hazard

   □ 

Do not plug cord into outlet with wet hands.

   □ 

Do not use this tool chest near a bathtub, a shower, or a 

      swimming pool.

   □ 

Chest plugs must match the outlet.

   □ 

Never modify the plug in any way.

   □ 

Do not use any adapter plugs with earth (grounded) chest 

      power strips.

   □ 

Unmodified plugs and matching outlets will reduce the risk

      of electric shock.

   □ 

Avoid body contact with earthed or grounded surfaces.  There

      is an increased risk of electric shock if your body is earthed or 
      grounded.

 

 

 

 

CAUTION:

                    RISK OF ELECTRICAL SHOCK: This unit has 
two power supply cords. Make sure all cords are 
unplugged before any servicing or cleaning.

 

 

 

 

WARNING:

                      Changes or modifications to this unit not 
expressly approved by the party responsible for 
compliance could void the user’s authority to operate 
the equipment.

Follow all manufacturers' Warnings and Operating 
Instructions for your extension cord.

Содержание H72CH9HD












Отзывы: