8
Attaching the Screw driver holder
5
□
CAUTION:
Do not over tighten the bolts.
CAUTION:
Do not over tighten the bolts.
Position the Screw driver holder (I) over the holes on
the right side of cabinet (A). Attach 3 pcs Bolts (CC)
and tighten with supplied Hex Key (DD).
□
□
□
□
The power outlet can be installed facing either the inside or the outside of the Cabinet.
To change the direction of the power outlet, remove the 8 pcs M4x12 bolts from the outlet panel cover, then remove the 8
pcs M4x12 bolts from the blank cover plate on the opposite side. Figure 6:1
Gently remove the power outlet and holder and install on the opposite side.
Attach the outlet panel cover securing the power outlet in place, and then attach the blank plate on the
opposite side. Figure 6:2
Power outlet orientation
6
A
I
CC
Figure 6:1
Figure 6:2
