4
Replacement Parts
Assembly
HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
HUSKYTOOLS.COM
Please contact 1-888-HD-HUSKY for further assistance.
5
GG
E
Handle
690111-A
Riser
690111-B
690111-C
Wheel Guard
Axle Bracket
690111-E
690111-F
Axle
690111-G
Wheel
690111-H
Leg Brace
690111-I
Tray Brace
Leg
690111-J
690111-AA
2 1/2 in. Bolt
690111-BB
2 1/8 in. Bolt
690111-CC
2 in. Bolt
690111-DD
3/4 in. Bolt
690111-EE
3/4 in. Bolt
690111-FF
Nut
690111-GG
EVA washer
690111-HH
4 1/2 in. Bolt
CC
NOTE:
Make sure axle bracket (E) and
tray brace (I) align with front hole.
NOTE:
Don’t tighten the nuts at this time.
Installing wheelguard
Use bolts (DD) and nuts (GG) to attach
wheelguard (C) to front of handles (A).
5
□
Installing axle bracket and
tray brace
Use bolts (CC) and nuts (GG) to attach
axle bracket (E) and tray brace (I) to the
handle (A).
6
□
A
NOTE:
Bolts should point to the inside of
the handles. Use a ½ in. wrench or socket
to fully tighten wheelguard. Leave the rest
of the nuts and bolts loosely fastened.
NOTE:
To keep wheel from sliding side
to side after assembly, push axle brackets
toward each other prior to tightening.
Installing wheel
Position wheel (G) between handles (A).
Slide axle (F) through wheel (G) and then into attached axle bracket (E).
Slide second axle bracket (E) over other end of axle.
Loosely attach second axle bracket (E) and second tray brace (I) to handle (A) using bolts (CC) and nuts (GG) .
Use bolts (FF) and nuts (GG) to attach tops of tray braces (I) to tray (D).
Fully tighten all hardware.
7
□
□
□
□
□
□
E
E
F
CC
I
G
FF
GG
GG
A
A
D
GG
A
A
DD
DD
C
CC
I
