47904
12/14/2004
7) Remove 3/8”-24 lock nut, cam latch and spacer from Handle Assembly. Align handle with holes (shank
will pass through opening in drawer) and re-install the 10-32 flathead bolts/nuts using 1/8” Allen Wrench.
On the inside of the drawer, re-install the spacer, cam latch and 3/8”-24 lock nut on handle shank, tighten
nut only finger tight. Turn handle and note the position of the cam latch. The cam latch should be oriented
on handle shank so that it will secure drawer unit when handle is horizontal on drawer (see note #2).
8) Remove 3
rd
row seat from vehicle.
9) Insert one (1) of the 3/8” X 2_” Hex Bolts through channel iron. Screw a Nut Plate onto the bolt a few
turns (see note #3).
10) Position Channel Iron over the 3
rd
seat mounting rod.
11) Insert the remaining 3/8” X 2-3/4” Hex Bolt through the remaining hole, threading it into Nut Plate. The
Nut Plate should be positioned so that it will be pulled against 3
rd
seat mounting rod when bolts are
tightened.
12) Position Storage Box so it is centered side-to-side and also so that it is far enough towards the second
seat that the hatch door can close without hitting the handle of the box.
13) Position the four (2) 4” pieces of strap so that one piece is centered under each end of the Channel Iron
(see note 4).
14) Evenly tighten all bolts; do not over tighten.
15) Guide drawer back into drawer slides and re-insert detent pins.
16) Install Drawer Liner (foam) into drawer.
17) Install Cargo Liner by first centering liner on top of Drawer Unit. Then, insert the Cargo Liner Retention
Block into the recess molded into the cargo liner. Using the Phillips Head Screwdriver, install the three #8 X
1-1/4” Stainless Steel Wood Screws through the holes in the Retention Block and into the top of the Storage
Box (see note #5). Take care to make sure the liner is center before attaching.
18) Your Storage Box should be treated as you would the exterior of your vehicle. Wash with gentle soap
and water and rinse well. The easiest way to clean the drawer liner or cargo liner is with a damp cloth or
sponge. If using a cleaner, 409® or Glass Plus® work well. The use or Armor All®, Son-of-a-Gun® or
similar items is discouraged as the products make the liner slick.
19) Your Husky Storage Box comes with a limited one-year warranty. Winfield Consumer Products
warrants its SUV Storage Box to be free from defects in material and workmanship of the product for one
year, from the date of purchase, with proof of purchase.
