4711 H2 Spare Tire Ca#116FA.doc
H2 Hummer Spare Tire Carrier Mounting Instructions
Tools Required for Installation:
Package Contents:
Socket Wrench
Swing arm Assembly
19 MM socket
Hinge Plate
15 MM socket
Striker Plate
7/16” Wrench
License Plate Bracket
Torque Wrench
Fastener Hardware Bag
(Includes):
Drill
M12 X 70 MM Flange head bolts X 4
7/16” Drill Bit
10-32 X 3/8” Button head bolts X 2
Center Punch
Wire Tie X 3
Hammer
Thick Grommet
Phillips Head Screwdriver
Thin Grommet
1/8” Allen Wrench
3/8”-24 X _” Hex Bolt & 2” Fender Washer
License Plate Fastener Bag
Jack Support Bracket (Back Page)
Jack Bracket Vibration Dampener
Interior Panel Plug
End Caps (2”X 4”) X 2
Before beginning installation, check to make sure all components listed above are included in packaging.
