Huskie Tools REC-6750, Руководство по эксплуатации

Страница: 8 / 16

www.spartacogroup.com 800-860-6170
8
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
COMPRESSION
1. Consult your connector manufacturers recommendations on using a dieless compression
tool with the connector and cable being used. Not all connectors are suitable for dieless tool
applications.
2. Retract the indenting nibs by pressing the release button.
3. Position the connector, and center it between the indenting nibs. Activate the trigger and
advance the nibs so the connector is held in place. Check connector for correct positioning.
4. Insert the cable into the connector and activate the trigger until
the compression is completed. A series of clicks will be heard while
the compression is being made, followed by the tool running in a
“free” mode. This indicates a completed cycle and a full
compression.
5. Press release button to retract the indenting nibs. and remove the
connector from the tool.
TRIGGER AND RELEASE BUTTON
1. The ram advances when the trigger is pressed
and stops when the trigger is released.
2. To retract the ram, press the release button. The
ram continues to retract while the release button is
pressed.