Huskie Tools REC-634YC, Руководство по эксплуатации

Страница: 5 / 16

www.spartacogroup.com 800-860-6170
5
KIT INCLUDES
Large copper cable cutting is finally made easy with the
REC-634YC
–
just pull the trigger and 6.6 tons
immediately goes to work for you. The hydraulic system now features a rapid advance for reduced cycle
times. This tool is similar to the REC-630Y, but has a slightly larger jaw opening without a “keeper” guard.
Its sharp blades are rated for copper and aluminum cables only, up to 800 MCM or 1.4” Al outside diameter.
The open “C” type jaw is very convenient for the operator when reaching out to cut cable, as opposed to
latching a cutting jaw around the cable. The jaws will accept a maximum of 800 MCM copper or aluminum
cables up to 1.4.” Distortion of the cable is minimal and cables can still be sleeved easily. Once the cable
is severed, the cutter blades can be opened by the push of the release trigger located below the activation
trigger – one finger is all that is needed to cut and release the tool.
NOTE:
DO NOT CUT STEEL.
• 1 Battery Powered Tool
• 1 Carrying Case
• 1 CH-94 Charger
• 2 BP-84 Lithium Ion Batteries
• 1 Carrying Strap
Battery and Charger
• BP-84 Huskie Tools Lithium Ion Battery
• CH-94 Huskie Tools Charger
• This charger can charge the BP-84, BP-82 and BP-80 only.
Huskie Tools batteries, including the BP-70, BP-70EI
and the BP-70MH must be charged with the CH-90, CH-80, or
previous charger models.